|
Storage, Cleaning and Sterilization Guidelines for Breathing
Bags
A. Storage - All rubber, neoprene and plastic products should be stored
in a cool, dark environment, in containers which help minimize mechanical damage
and prevent condensation of moisture on the products. Ideal Storage temperatures
are for 5° C (40° F) to 15° C (59° F).
Direct and indirect sunlight and artificial light with ultraviolet content
will hasten deteriorations of all rubber goods.
Rubber, neoprene and plastic products should be stored in such a way that contact
with metals, liquid, solvents, oils, or greases is avoided.
Shelf life when stored according to recommendations should be approximately
two years with the exception of conductive rubber which has a shelf life of
6 months.
B. Cleaning - Rubber, neoprene and plastic products may be washed with
mild detergents of a natural liquid soap. Avoid cleaning tools which can harm
the surface of the products. After washing, articles should be air dried.
C. Sterilization - Along with following outlined recommendations, personnel
should closely follow the appropriate manufacturers recommendation relating
to the use of chemicals, procedures, and/or equipment.
- Autoclaving - Plastic parts must not be heat sterilized!
Rubber parts may be steamed, but it must be noted that high temperature and
repeated autoclaving will hasten deterioration of the products. Longer life
of the products will be achieved if cold sterilization is used. Rubber and
neoprene bags and tubes may be autoclaved using normal rubber cycle methods.
Temperature must not exceed 134° C (250° F) for 15 minutes.
- Ethylene Oxide Gas Method - All reusable rubber and plastic products
with the exception of cushion masks may be sterilized using ETO if sufficient
aeration is provided.
SPECIAL NOTE: Dry heat must not be used for Sterilization!
Conductive rubber products must not come into contact with:
Strong cleaning Soaps Ethers
Phenols Cresols
Mydocarbons Alcohol Vegetable or mineral oils Cleaning Fluids
Copper, Brass, Manganese or Oxidizing agents
PRODUCTS SHOWING DETERIORATION SHOULD BE DESTROYED.
| 
